DO-6800

Q: What does the Do-6800 controller do?

Online control of dissolved oxygen and temperature data.

Q: How do I install the Do-6800 controller?

Choose a location to install the sensor wiring.

Q: How to maintain Do-6800 controller?

Clean the calibration and check the wiring regularly.

Q: Do - 6800 Why is the reading inaccurate?

Sensor failure or calibration deviation.

DO-6800

DO-6800 online Dissolved Oxygen Temperature Transmitting Controller is a micro computerized precision instrument. The large LCD display, English menu operation. Multi-parameter display at the same time: the value of dissolved oxygen, temperature, output current, alarm points, etc. Intuitive and easy to read, and alarm for range over run Screen displays alarm status and accompanied by a switch ON / OFF signal output Automatic Temperature Compensation: Automatic 0℃ to 60℃ Communication function (optional): RS-485 communication interface (MODBUS protocol is partially compatible), 4 to 20 mA current output corresponding to the DO value can be set freely. Notepad: can store 50 measurements, the user can record measurement data. Hysteresis amount can be set freely to avoid frequent switching relay action Watchdog function: to ensure that the instrument will not crash Core devices from famous foreign brands Restore the factory settings. Power-down protection> 10 years

Product Details

Contact Now

Product Details

Application

Widely used in the detection and control of dissolved oxygen in various water treatments, boiler water deoxygenization, environmental monitoring, aquaculture and other fields.

DO-6800

Main Technique Specification

	DO-6800 online Dissolved Oxygen Temperature Transmitting Controller with Polarography DO sensor
Measuring Range	0.0 - 20.00 mg /L (ppm) (standard version) 0 - 200.0 ug /L (ppd), (optional) 0-60℃, 0-100℃ (optional), , 0-100℃ (optional),
Resolution	0.1 ug/L, 0. 01 mg/L, 0.1℃
Accuracy	ug/L: ±20%FS； mg/L:±2%FS， ±0.3℃
Display	Large Screen Multi-parameters LCD
Temp. Compensation	NTC 10K, 0.0℃-60.0 ℃, 0-100℃ (optional), Automatic temperature compensation
Current output	isolation to protect , 4 ~ 20mA signal output
Control output	two sets of ON / OFF relay contacts, divided into the high point, low alarm signal , optically isolated output.
Communication output	Standard Modbus RS485 function to PC (optional)
Contact capacity	10A/220V AC (Resistive Load)
Output load	load <500Ω (0-10mA), load <750Ω (4-20mA)
Power	AC 220V±10%, 50/60Hz
Working environment	Ambient Temp. 0-60℃, Relative Humidity ≤90%
Dimensions	96×96×115mm(H X W X D), 0.9kgs
Hole size	91×91mm H X W)
Installation Mode	Panel Mounted
Protection grade:	IP57

DO Controller With Polarography DO Sensor

Main Technique Specification

	DO-6800 Online Dissolved Oxygen Temperature Transmitting Controller with Galvanic DO sensor
Measuring Range	0.00 - 20.00 mg /L (ppm) standard version 0 - 200.0 ug /L (ppd), (optional) 0-60℃, 0-100℃ (optional),
Resolution	0.1 ug/L, 0. 01 mg/L, 0.1℃
Accuracy	ug/L: ±2.0%FS； mg/L:±2%FS， ±0.3℃
Display	Large Screen Multi-parameters LCD
Temp. Compensation	NTC 10K, 0.0℃-60.0 ℃, 0-100℃ (optional), Automatic temperature compensation
Current output	isolation to protect , 4 ~ 20mA signal output
Control output	two sets of ON / OFF relay contacts, divided into the high point, low alarm signal , optically isolated output.
Communication output	Standard Modbus RS485 function to PC (optional)
Contact capacity	10A/220V AC (Resistive Load)
Output load	load <500Ω (0-10mA), load <750Ω (4-20mA)
Power	AC 220V±10%, 50/60Hz
Working environment	Ambient Temp. 0-60℃, Relative Humidity ≤90%
Dimensions	96×96×115mm(H X W X D), 0.9kgs
Hole size	91×91mm H X W)
Installation Mode	Panel Mounted
Protection grade:	IP57

DO-6800 Controller With Galvanic Sensor

DO-6800

Get in Touch

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.

FAQS

Frequently Asked Questions (FAQ) About Do-6800

What does the Do-6800 controller do?

Online control of dissolved oxygen and temperature data.

How do I install the Do-6800 controller?

Choose a location to install the sensor wiring.

How to maintain Do-6800 controller?

Clean the calibration and check the wiring regularly.

Do - 6800 Why is the reading inaccurate?

Sensor failure or calibration deviation.

Related News

Aug.21,2025

The Importance of a Pressure Switch for RO System Safety

Reverse osmosis (RO) systems are critical for ensuring clean, safe water in various settings, and their reliability hinges on robust safety mechanisms.

Aug.21,2025

Low Electrical Conductivity Materials for Insulation Purposes

In industries ranging from electronics to power transmission, the demand for reliable insulation materials hinges on their electrical conductivity properties.

Aug.21,2025

Key Considerations for Selecting Turbidity Testing Devices

In water quality management, accurate measurement of turbidity—cloudiness caused by suspended particles—is essential across industries.

Aug.21,2025

How to Choose the Right ORP Controller for Industrial Applications

Selecting the right orp controller for industrial applications requires a deep understanding of specific operational needs, compatibility with existing systems, and reliability in diverse environments.

Aug.21,2025

Best Practices for Calibrating an Optical Dissolved Oxygen Meter

Calibrating an optical dissolved oxygen meter is a critical step in ensuring accurate measurements of dissolved oxygen levels in water, a parameter vital for industries like aquaculture, environmental monitoring, and water treatment.

Aug.21,2025

Benefits of Using an Automated Chlorine Monitor

In the realm of water quality management, maintaining precise chlorine levels is paramount for safety and compliance across industries.

Aug.19,2025

Water Quality: Understanding TDS

When it comes to water quality, the total suspended solids meter is an essential tool.

Aug.19,2025

Turbidity Control: Clarity You Can Trust

In the quest for clear and safe water, the turbidity transmitter stands out as a crucial tool.